Alloy: 1XXX, 3003 8011, 3105

Temper:   H14, H16, H18, H24 , O

Thickness:   0.08mm-6.0mm per customer’s  request

Symintec produces dozens of aluminum continuous casting lines and cold rolled lines, and relative further processing machines. 1+ 4 hot rolled production line guarentees the best quality of aluminum plate/sheets and quick delivery


1) Series: 1050 1060 1070 1100 1200 1235 etc.
2) Series: 3003 3004 3005 3104 3105 3A21 etc.
3) Series: 8006 8011 8079 etc.

4.Temper: all available, H1X, H2X, H3X, O, HXXX
5.Continuous casting and hot rolled both available
6.Coil ID: 75mm, 150mm, 200mm, 300mm, 400mm, 508mm or negotiable
7.Coil OD: per customer’s request

Products Alloy Temper Thickness(mm) Width(mm) length
Aluminum coil 1XXX, 3003 8011, 3105 H14, H16,
H18, H24 , O
0.08mm-6.0mm 200mm-1500mm 500mm-4000mm

 Features for Aluminum coil:
1) Smooth and flat
2) Weather resistance
3) Good quality surface finish
4) Anti-corrosion
5) Anti-ultraviolet


Alloy Si Fe Cu Mn Mg Cr Zn V< Ti Al
1050 0.25 0.4 0.05 0.05 0.05 0.05 99.5
1060 0.25 0.35 0.05 0.03 0.03 0.03 0.05 0.05 0.03 99.6
1100 0.95 Si+Fe 0.05–0.20 0.05 0.1 99
1350 0.1 0.4 0.05 0.01 0.01 0.05 99.5

More applications:

1) Radiator
2) Condenser
3) Insulation Material
4) construction


Ingot→Melting→Online air-Removing→Casing→Sawing→Scalper→Heating→Hot rolling→Hot rolling coil (Casting) →Cold rolling (Rewind reel/ Annealing) →Old slitting→Aluminum coil(cleaning-straightening)→ Inspection→Packaging→Delivery


Siemens fully digital system, precise control of product thickness
Electronic aspects uses a full digital DC converter with a programmable logic controller Siemens 400 to achieve fully automated process; mechanical aspects adopt the entire hydraulic control with high precision pressure sensors and servo valve to guarantee the good plate pattern. Annual output of foil mill is up to 20,000 tons. The maximum thickness is 0.6 mm while the minimum is 0.02 mm; the maximum width reach to 1800 mm.

Slitting machine designed by Liaoning Machinery Research Institute, high accuracy

Slitting machine put into operation in October 2010 , is designed and installed by the Liaoning Machinery Research Institute, machinery aspects using hardened gears for high accuracy and good stability; Cone and drive unit using hydraulic to realize positioning; Electrical aspects adopt profibus_dp, bus communication, signal transmission speed, high precision, low failure rate, anti-interference ability  to guarantee the reliability of equipment.

ISO TS16949

SGS Certification: accelerate development and application of automotive aluminum 

To speed up the development and application of high performance aluminum automotive products, Symintec passed SGS (Swiss SGS, the world’s leading inspection, verification, testing and certification organization) strict audit, obtained SGS ISO / TS16949: 2009 quality management system certificate of certification organization


Export standard, covering with brown paper and plastic film then packed with wooden case or wooden pallet, as customer requested. It is strong enough and good protection for sea transportation. Usually it is around 2 tons in one package, and loading 18-22 tons in 1×20′ container.

Leave Message